PEEK Rods

Get a Price/Quote

Product Details:

Surface Finish Smooth
Warranty Available upon request
Density 1.32 Gram per cubic centimeter(g/cm3)
Heat Resistance Up to 250Â°C
Melting Point 343Â°C
Tensile Strength 90â100 MPa
Color Pattern Solid
Click to View more

Request to Call Back Send Inquiry

Product Details
Product Description

PEEK Rods Product Specifications

Surface Finish Smooth
Material Polyether Ether Ketone (PEEK)
Weight Varies based on dimensions
Hardness 85 Shore D
Shaping Mode Rod
Density 1.32 Gram per cubic centimeter(g/cm3)
Type PEEK Rod
Warranty Available upon request
Plastic Molding Type Extruded
Melting Point 343Â°C
Tensile Strength 90â100 MPa
Heat Resistance Up to 250Â°C
Length Customizable
UV Resistant Yes
Color Pattern Solid
Plastic Type Thermoplastic
Color Ivory
Size Standard or Customizable

Product Description

“YOGDEEP”

PEEK (Poly Ether Ether Ketone) is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoro polymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.

Standard Sizes: Dia 6 mm to 100 mm; Length: 1 mtr ; Custom Sizes available on request.

FAQs of PEEK Rods:

Q: What is the hardness level of the PEEK Rods?

A: The hardness of PEEK Rods is 85 Shore D.

Q: What is the tensile strength of the PEEK Rods?

A: The tensile strength of PEEK Rods ranges from 90 to 100 MPa.

Q: What is the melting point of PEEK Rods?

A: The melting point of PEEK Rods is 343C.

Q: Are PEEK Rods customizable in terms of length and size?

A: Yes, PEEK Rods are customizable in both length and size.

Q: Is the PEEK Rod UV resistant?

A: Yes, PEEK Rods are UV resistant.

Q: What is the heat resistance of PEEK Rods?

A: PEEK Rods have a heat resistance of up to 250C.

Q: What is the warranty coverage for PEEK Rods?

A: Warranty for PEEK Rods is available upon request.

Other Products in 'PEEK Products' category

Peek Tubings Size : Various sizes available Color : Beige Color Pattern : Solid Plastic Type : Engineering Thermoplastic Length : Customizable UV Resistant : Yes Heat Resistance : Up to 250Â°C Melting Point : 343Â°C Leak Protection : Other, Yes Tensile Strength : 100 MPa Plastic Molding Type : Extrusion Warranty : 1 Year Density : 1.32 Gram per cubic centimeter(g/cm3) Type : Tubing Shaping Mode : Tubular Material : PEEK (Polyether Ether Ketone) Weight : Lightweight Hardness : Other, Rockwell M 99 Surface Finish : Smooth

Send Inquiry

SEND INQUIRY CALL ME FREE